Marble component

Marble components adopt "It is made by mechanical processing and manual fine grinding. The granite three-dimensional components show black luster, structure, uniform texture, good stability, high strength and good hardness. The marble components can be maintained under heavy load and general temperature, and have the advantages of non rusting, non magnetization, constant type, etc.

physical properties of marble components:

1, specific gravity: 2970-3070kg/m3

2, compressive strength: 2500-2600kg/cm3

3, elastic coefficient ：1.3-1.5 × 106kg/cm2

4. Water absorption:

5. Shore hardness: above hs70

our services:

first, we process granite components such as granite bases, gantry, guide rails and sliding plates of various CMM, PCB drilling machine, milling machine, engraving machine, etc

II. The processing length is 7 meters, the processing width is 3 meters, and the processing thickness is 800 mm. Granite components shall be designed and produced according to the requirements of the demander

marble components are measuring tools used to measure the accuracy of parts and components in industrial production by using the characteristics of marble. They have good accuracy, good stability, are not easy to deform, and can measure the accuracy. Marble components are made of stone, which have the characteristics of non rusting, good and long service life, and do not need maintenance. Marble components can slide smoothly without stagnation in measurement. For working surface measurement, the general scratch does not affect the measurement accuracy

five steps of marble component maintenance

1. Detect the accuracy of marble components and determine their current error

2. Rough grind the marble components with sanding and abrasive tools, and achieve the benchmark leveling requirements through rough grinding

3. After rough grinding, the marble components shall be subject to secondary and semi fine grinding, that is, deep scratches shall be removed to make the marble components reach the standard flatness

4. Polish the working surface of marble components to achieve the required accuracy

5. Test the accuracy of marble components after grinding, and then test the accuracy of marble components after standing for a period of time. The above is the five steps of marble component maintenance. To serve the marble component attentively, you need to determine the current error range of the marble component, what range you need to serve attentively, and whether there are pits on the working face. If there are small pits on the surface of marble components, they should be returned to the factory for processing. If only the accuracy changes, please go to the use site for maintenance